Table of Contents
Advertisement
decide whether or not ("Use" or "Do not use") to use the distance determination based on
Measured Power supplied by the company identifier in the BLEBeacon app. Distance is
determined from the Measured Power and RSSI value as shown below.
Determination result
Immediate
Near
Far
Unknown
MOVERIO Pro Developer's Guide (Rev.1.4)
Table 8-6 Determining distance for the BLEBeacon app
RSSI value (when Measured Power for the Beacon is set to -70)
127 to -70 (=Measured Power)
-51 to -90 (=Measured Power - 20)
-91 to 128
Could not receive Advertise data for more than three seconds
Or the company identifier was not Apple (0x004C) or Nordic
(0x0059).
127
Advertisement
Table of Contents
