Epson Moverio Pro BT-2000 Developer's Manual page 25

Select [Browse my computer for driver software].
Select the driver from the following path.
"C:\Users\User name\AppData\Local\Android\sdk\extras\google\usb_driver"
When [Android Composite ADB Interface] is displayed in [Android Device] as shown below, ADB
connection is available.
2.5.1.3. Checking the connection
You can check if the computer and the BT-2000 are connected by using the ADB check
command.
Start the command prompt, run "cd C:\Users\ User name \AppData\Local\Android\sdk\tools ", and
move the folder.* It is useful to maintain the environment variable path mentioned above.
When you execute "adb devices" the message "0123456789ABCDEF2 device" is displayed. ADB
connection is complete.
* If this is not displayed, reconnect the BT-2000 to the USB port, and rerun the "adb devices"
command.
MOVERIO Pro Developer's Guide (Rev.1.4)
19