Table of Contents
Advertisement
Quick Links
Smart Headset
MOVERIO Pro
User's Guide
Safety Instructions..............................................................2
Part Names and Functions ............................................5
Getting Ready .......................................................................6
Turning On and Off ...........................................................8
Wearing the Controller....................................................9
Included Items .................................................................. 11
Supported Helmet Sizes ............................................. 11
Part Names and Functions ......................................... 12
Wearing the Product ..................................................... 13
Included Items .................................................................. 15
Part Names and Functions ......................................... 16
Wearing the Product ..................................................... 17
Maintenance ...................................................................... 19
Troubleshooting ............................................................... 20
Optional Items ................................................................... 21
Specifications ..................................................................... 22
Intellectual Property Rights ....................................... 23
General Notes .................................................................... 23
Contact List ......................................................................... 26
Advertisement
Table of Contents
Related Manuals for Epson MOVERIO Pro BT-2200
Summary of Contents for Epson MOVERIO Pro BT-2200
-
Page 1: Table Of Contents
Smart Headset MOVERIO Pro User's Guide Safety Instructions..............2 Part Names and Functions ..........5 Getting Ready ...............6 Turning On and Off ............8 Wearing the Controller............9 Included Items ..............11 Supported Helmet Sizes ..........11 Part Names and Functions ......... 12 Wearing the Product ............. 13 Included Items .............. -
Page 2: Safety Instructions
Safety Instructions For your safety, read the attached documents carefully to use the product correctly. After you have read the documents, keep them in a safe place so that you can refer to them quickly at a later date. Safety symbols This symbol indicates information that, if ig- Do not use the product in locations where it may get wet or is subject Warning... - Page 3 In the following situations, turn off this product immediately, unplug If the batteries are not handled correctly, the battery could explode or the power plug, and contact your local dealer or the Epson service call leak which could cause a fire, injury, and corrode the product. Take the center.
- Page 4 Data such as video or images stored on the product may be lost or damaged when the product malfunctions, is repaired, or undergoes other services. Epson shall not be responsible for the loss of any data, damage to data, or loss of profits that occurs at such a time.
-
Page 5: Part Names And Functions
Part Names and Functions Controller The illustrations show the controller when it has been removed from the controller holder. MicroUSB port Cross-key When connecting to a computer and so on, connect a commer- Selects items and moves the cursor when making settings or cially available USB cable. -
Page 6: Getting Ready
Getting Ready Charging the Battery Replacing the Battery Make sure you charge the product when using it for the first time. This section explains how to replace a battery that is running low Initial charging takes approximately three hours. with a battery that is charged. You need to purchase optional bat- teries and a battery charger for replacement. - Page 7 Getting Ready Replacing the Inner Pad Install the charged battery. Align the charging connectors on the battery with those on There are three types (A/B/C) of replacement inner pads available the device, and then press the battery down until you hear it for the BT-2000, and one for the BT-2200.
-
Page 8: Turning On And Off
Turning On and Off Note Before turning on the product, check that the battery is charged. ➡ “Charging the Battery” p. 6 Turning On Turning Off Press the [ ] power button until the power indicator is lit light Hold down the [ ] power button for more than one second, and blue. -
Page 9: Wearing The Controller
Wearing the Controller Warning Product usage precautions • Make sure you check that the following parts are not damaged each time you use this product. • Controller holder • Armband • Shoulder holder (optional) • Reel clip If you notice any problems with any of these items, do not use the product as when it cannot be secured safely, it could cause an accident or injury. •... - Page 10 Wearing the Controller Wearing the Controller on Your Arm This section explains how to wear the controller on your arm using Wind up the extra cable, and secure it in place with the armband. the strap. Make sure the cable does not catch on anything in the sur- Placing the controller in the controller holder.
-
Page 11: Included Items
BT-2200 Included Items Headset Shade Attach to the helmet to view images. Shades the product from too much exterior light. ➡ “4. Wearing the headset” p. 14 ➡ “Installing the Shade/Protective Shield/Lens Holder” p. 7 Protective shield Controller (with controller hold- Protects the product's lens from foreign objects and air-borne objects. -
Page 12: Part Names And Functions
Part Names and Functions Headset (BT-2200) Camera Rubber band Captures images and movies. Remove the protective film before Secures the headset to your helmet. use. You can adjust the angle of the camera. ➡ “Replacing the Rubber Band (BT-2200)” p. 14 Helmet holder Use the four helmet holders to make sure the headset does not come off during use. -
Page 13: Wearing The Product
Wearing the Product For the BT-2200 you need to secure the headset to the helmet before wearing. ➡ “Supported Helmet Sizes” p. 11 Warning Product usage precautions Make sure you check that the following items each time you use this product. The lens should stop at the Route the cable through two The helmet holder, band holder,... - Page 14 Wearing the Product 2. Wearing the controller Note If the lens is below eye level and you cannot see the images, use ➡ “Wearing the Controller” p. 9 the dedicated helmet inner cap. If you cannot view a part or any of the image, adjust 3.
-
Page 15: Included Items
BT-2000 Included Items Headset Shade Wear the headset to view images. Shades the product from too much exterior light. ➡ “3. Wearing the headset” p. 17 ➡ “Installing the Shade/Protective Shield/Lens Holder” p. 7 Protective shield Controller (with controller hold- Protects the product's lens from foreign objects and air-borne objects. -
Page 16: Part Names And Functions
Part Names and Functions Headset (BT-2000) Camera Lens justifier Captures images and movies. Remove the protective film before You can adjust the position of the lens vertically. Adjust the use. You can adjust the angle of the camera. left and right by the same amount so that the lens is not tilted during adjustment. -
Page 17: Wearing The Product
Wearing the Product Warning Product usage precautions • Before operating this product, make sure it can be worn according to the procedures in “Wearing the Controller” p. 9 as well as on this page and the fol- lowing pages. • As much as possible, make sure that the cables are secured to your body and do not sag or droop. If the cables come loose, they could get caught or entangled in something and cause an accident or injury. - Page 18 Wearing the Product Re-tightening Screws (BT-2000) Tighten the head band and secure the head pad. Position the headset while adjusting the position of the lens After using the product for an extended period, the screws securing so that you can see the images clearly. the lens may become loose.
-
Page 19: Maintenance
Maintenance Cleaning the Headset Cleaning the Charging Connectors If the controller's power connectors (x2) or the battery's connectors • If you can see marks in the image or if the image is hazy, check that are soiled or if there are foreign objects stuck to them, you may not there is no dust, fingerprints, and other dirt on the lens. -
Page 20: Troubleshooting
Troubleshooting If you think a malfunction has occurred, check the following. The product does not turn on Cannot use the controller • Check that the batteries are installed in the controller correctly. • You cannot perform controller operations when the key lock indica- •... -
Page 21: Optional Items
Optional Items You can purchase replacement parts for parts that wear out through normal use. See the following website to inquire about purchasing replacement parts. https://tech.moverio.epson.com/ja/store.html For Both Headsets BT-2000 Hard carrying case Inner pads (A/B/C)/Lens holder BO-HC2200 pack* BO-IP2000 Use this case when carrying or storing the product. -
Page 22: Specifications
Capacitor microphone Sensors GPS/geomagnetic sensor/IMU (accelerometer/gyroscopic sensor)/illumination sensor Bluetooth 3.0 HSP/A2DP/HID/OPP/SPP/AVRCP Bluetooth 4.0 LE *2 PXP/FMP *1 Restrictions in operation may occur when using an adapter plug. *2 You can only connect to a beacon with devices specified by Epson. -
Page 23: Intellectual Property Rights
2. We provide the source code of some open source software programs. If you desire to receive the source code above, please see the "http://www.epson. - Page 24 Cet appareil avec l’appareil W-LAN a été testé aux SAR et est conforme aux exigences des FCC et IC exposition pour les appareils portables. Le test SAR a été fait à distance de 0 cm du corps. Indication of the manufacturer and the importer in accordance with requirements of EU directive Manufacturer: SEIKO EPSON CORPORATION Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan Telephone: 81-266-52-3131 http://www.epson.com/...
- Page 25 General Notes List of Safety Symbols The following table lists the meaning of the safety symbols labeled on the equipment. No. Symbol mark Approved standards Meaning IEC60417 "ON" (power) No. 5007 To indicate connection to the mains. IEC60417 "OFF" (power) No.
-
Page 26: Contact List
A more up-to-date contact address can be obtained from the corresponding website listed here. If you do not find what you need on any of these pages, please visit the main Epson home page at www.epson.com. EUROPE, MIDDLE EAST & AFRICA... - Page 27 Contact List NORTH, CENTRAL AMERICA & CARIBBEAN ISLANDS CANADA COSTA RICA MEXICO ECUADOR Epson Canada, Ltd. Epson Costa Rica, S.A. Epson Mexico, S.A. de C.V. Epson Ecuador https://epson.ca https://epson.co.cr https://epson.com.mx https://epson.com.ec U. S. A. Epson America, Inc. https://epson.com/usa SOUTH AMERICA...
- Page 28 © 2019 Seiko Epson Corporation 2019.12 Printed in XXXXXXXX XX.XX.-XX(XXX)
Need help?
Do you have a question about the MOVERIO Pro BT-2200 and is the answer not in the manual?
Questions and answers