Epson Moverio Pro BT-2000 Developer's Manual page 167

Hide thumbs Also See for Moverio Pro BT-2000:
Table of Contents

Advertisement

/** ATT Error: Attribute cannot be read or written using read/write blob requests. */
public static final int BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG
/** ATT Error: Encryption key size used is insufficient. */
public static final int BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE
/** ATT Error: Invalid value size. */
public static final int BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH = 0x010D;
/** ATT Error: Very unlikely error. */
public static final int BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR
/** ATT Error: Encrypted link required. */
public static final int BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION
/** ATT Error: Attribute type is not a supported grouping attribute. */
public static final int BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE = 0x0110;
/** ATT Error: Encrypted link required. */
public static final int BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES
/** ATT Error: Reserved for Future Use range #1 begin. */
public static final int BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN
/** ATT Error: Reserved for Future Use range #1 end. */
public static final int BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END
/** ATT Error: Application range begin. */
public static final int BLE_GATT_STATUS_ATTERR_APP_BEGIN
/** ATT Error: Application range end. */
public static final int BLE_GATT_STATUS_ATTERR_APP_END
/** ATT Error: Reserved for Future Use range #2 begin. */
public static final int BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN
/** ATT Error: Reserved for Future Use range #2 end. */
public static final int BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END
/** ATT Error: Reserved for Future Use range #3 begin. */
public static final int BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN
/** ATT Error: Reserved for Future Use range #3 end. */
public static final int BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END
/** ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly
configured. */
public static final int BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR = 0x01FD;
/** ATT Common Profile and Service Error: Procedure Already in Progress. */
public static final int BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG
/** ATT Common Profile and Service Error: Out Of Range. */
public static final int BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE
};
Service information (class BluetoothLeGattService)
Member's name
byte[] uuid
char startHandle
char endHandle
MOVERIO Pro Developer's Guide (Rev.1.4)
Explanation
UUID (16bit only)
Start handle location
End handle location
161
= 0x010B;
= 0x010C;
= 0x010E;
= 0x010F;
= 0x0111;
= 0x0112;
= 0x017F;
= 0x0180;
= 0x019F;
= 0x01A0;
= 0x01DF;
= 0x01E0;
= 0x01FC;
= 0x01FE;
= 0x01FF;

Advertisement

Table of Contents
loading

This manual is also suitable for:

Moverio pro bt-2200

Table of Contents