UEi C165 Instruction Manual page 15

ROOM CO display
CO readings are recorded every 2 minutes for up to 30 minutes .
Test 00 = initial CO test in series .
Test Interval Time
Real time CO reading (ppm) .
The user can stop the Room CO test at any time by pressing
If not stopped earlier, the Room CO test will automatically end after the designated time .
The CO test series is automatically stored in the memory as a log number .
When completed the log can be printed immediately by pressing
Select "MENU" / "REPORT" / "ROOM CO" / "VIEW"
When LEDs are not flashing
/
Use the keys to change line .
Press to cause the LEDs on that line to flash .
With the LEDs flashing, press
Press to select that change .
/
The LEDs stop flashing and
/
Use to change the line again .
With no LEDs flashing
/
Use the keys to move the lit LEDs to the line you want .
You can change the LOG number and the TEST number so that you can view individual test results .
Press to select the line you want, and the LEDs will start to flash .
/
Now use the keys to change the number (the TEST number or the LOG number) .
Press when you are happy with the changes . The LEDs will stop flashing . Now use the
Sending to the printer or wireless device will only occur when you move the LEDs to the print line and press
Press to print the test, (or send to PC via optional Wireless module) .
16
ROOM CO TESTING CONT.
VIEWING/PRINTING A LOGGED ROOM CO TEST
/
to allow the parameter on that line to be changed .
TEST TYPE
.
.
/
keys to move the LEDs to the PRINT line .
.