Bpi-M1 Hardware Spec - Banana Pi BPI-M1 Manual

BPI-M1 hardware spec
Hardware specification
CPU
GPU ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
Memory (SDRAM) 1GB DDR3 (shared with GPU)
Onboard Storage SD (Max. 64GB) / MMC card slot UP to 2T on 2.5 SATA disk
Onboard Network 10/100/1000 Ethernet RJ45,optional WIFI
Video Input A CSI input connector allows for the connection of a designed camera module
Video Outputs HDMI, CVBS , LVDS/RGB
Audio Output 3.5 mm Jack and HDMI
Power Source 5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG)
USB 2.0 Ports 2 (direct from Allwinner A20 chip)
Reset button: Next to MicroUSB connector,Power button: Next to Reset button,Boot button
Buttons
(Optional): Behind HDMI connector
GPIO(2X13) pin GPIO,UART,I2C bus,SPI bus with two chip selects,CAN bus,ADC,PWM,+3.3v,+5v,ground.
LED Power Key & RJ45
Remote IR (Optional)
OS Android 4.2, Linux etc. OS
Product size 92 mm × 60mm
Weight 48g
working
-15~75℃
temperature range
A20 ARM Cortex™-A7 Dual-Core
9