Banana Pi BPI-M1 Manual page 49

BPI-M1 quick start
*Check that the SD card you inserted matches the one selected by the Tool.
*Click the "Format" button.
Format your SD under Linux os :
*Run fdisk –l command to check the SD card node.
*Run sudo fdisk /dev/sdx command to delete all partition of SD card.
*Run mkfs –t vfat /dev/sdx command to format the entire SD card as FAT. (x should be replaced according to your SD card
node)
3,Download the OS image from Download district(http://www.banana-pi.org)
4.Unzip the download file to get the OS image.
Windows: Right click on the file and choose "Extract all".
Linux: Run unzip [downloaded filename] command.
5.Write the image file to the SD card.
Android image
5.1 You need to use Phoenix Card to make the SD card. Download the Phoenix Card from https://drive.google.com/open?
id=0BzoTh3Vdt47ffi1ld0RuWXhUVzdYdjFjaHEtMlNQWVFTRmIxcC1OQnczSTV6OGRZWGplNU0
5.2 Run PhoenixCard.exe, Press "Disk Check" and select disk of SD Card.
49