Building The Cluster On Bpi - Banana Pi BPI-M1 Manual

Building the cluster on BPI
Building the cluster on BPI
Building the cluster
Building the rack
I built a rack for the Banana Pi boards using blanking plates for mains sockets, and four large bolts. I made a wooden
template from a piece of MDF, and used the template to drill holes in each of the banking plates. I drilled small holes for
plastic PCB supports which I use to hold each board in place. The bolts are inserted through the holes at the corners of the
blanking plates, and held in place with glue.
more please see:
https://www.hackster.io/Penguinfly/banana-pi-cluster-47d566
101