Banana Pi BPI-M1 Manual page 51

BPI-M1 quick start
Linux image:
5.6 burun Linux image under Windows os:
*Download a tool that can wirte image to SD card, such as Win32 Diskimager from:
http://sourceforge.net/projects/win32diskimager/files/Archive/
*Open the unzipped image file
*Click Write button. Wait patiently to successfully complete writing.
5.7 burun Linux image under Linux os:
*Run fdisk –l command to check the SD card node.
*Run dd if=[imagename] of=/dev/sdx command to write image file to SD card. Wait patiently to successfully complete
writing.
Step4: Set up your Banana Pi M1
According to the set up diagram below, you can easily set up your Banana Pi.
1. Insert the written-image SD card that to the SD card spot on the left side edge of the underside of the board.
51