Hisense ADT-12UX4SSNL3 Technical & Service Manual page 109

W I R I N G D I A G
W I R I N G D I A G
1 1 .
1 1 .
(B) DO NOT PUSH THE BUTTON OF THE MAGNETIC SWITCH(ES). It will cause a serious Accident.
NOTES:
1) Follow local codes and regulations when selecting field wires.
2) The wire sizes marked in the table are selected at the maximum current of the unit
according to the European Standard ,EN60335-1. Use the wires which are not lighter than the
ordinary tough rubber sheathed flexible cord (code designation H07RN-F) or ordinary
polychloroprene sheathed flexible cord (code designation H07RN-F).
3) Use a shielded cable for the transmitting circuit and connect it to ground.
4) In the case that power cables are connected in series, add each unit maximum current and
select wires below.
Selection According to EN60335-1
Current i(A)
i≤6
6＜i≤10
10＜i≤16
16＜i≤25
25＜i≤32
32＜i≤40
40＜i≤63
63＜i
* in the case that current exceeds 63A, do not connect cables in series.
DC-� INVERTER AIR CONDITIONER TECHNICAL&SERVICE MANUAL
R A M
R A M
Wire Size(mm 2 )
0.75
1
1.5
2.5
4
6
10
*
107