Hisense ADT-12UX4SSNL3 Technical & Service Manual page 100

W I R I N G D I A G
W I R I N G D I A G
1 1 .
1 1 .
Static pressure setting:
Hold down both"MODE"button and"ADD.FUNC."button for 3 seconds, symbol
1
blinking at the same time.
Press" / "button to adjust parameter number until display "17", and press "ENTER"button to entering
2
system parameter adaption state, symbol
Select desired parameter code 10 by pressing" / "button , and press "ENTER" button to confirm.
3
Select desired function code to rewrite the parameter values by pressing " /
4
"ENTER" button to confirm.
Press "ON/OFF"button or "CANCEL"button to quit.
5
If you still have any trouble, please contact local technical service center of our company for further information.
DC-� INVERTER AIR CONDITIONER TECHNICAL&SERVICE MANUAL
R A M
R A M
stop blinking.
and parameter code
"button , and press
98