Panasonic 2WAY Multi Technical & Service Manual page 157

6) Refrigerant setting (Level 2)
Rejection conditions
Setting start operation method
Setting change operation method : After entering the setting start operation mode, operating the UP (S005)
Example: 

Setting confi rm operation method : After entering the setting start operation or setting change operation
Setting cancel operation method
Setting range
0 Not set
1 Normal
2 •
7) Generator setting (Level 2)
Rejection conditions
Setting start operation method
Setting change operation method : After entering the setting start operation mode, operating the UP (S005)
Example: 

Setting confi rm operation method : After entering the setting start operation or setting change operation
Setting cancel operation method
Setting range
0 Not set
1 •
2 •
3 No generator
: Not accepted during indoor operation
: Press the SET (S007) key for one second.
and DOWN (S006) keys makes it possible to change the setting values.
(TEST/WARNING LED light)
: When pressing the UP (S005) key
: When pressing the DOWN (S006) key
completed, press the SET (S007) key for one second. (TEST/
WARNING LED off)
: Press the HOME (S004) key for one second before confi rming setting.
: 00 to 02


•
: Not accepted during indoor operation
: Press the SET (S007) key for one second.
and DOWN (S006) keys makes it possible to change the setting values.
(TEST/WARNING LED light)
: When pressing the UP (S005) key
: When pressing the DOWN (S006) key
completed, press the SET (S007) key for one second. (TEST/
WARNING LED off)
: Press the HOME (S004) key for one second before confi rming setting.
: 00 to 03

•
•

V–38