Panasonic 2WAY Multi Technical & Service Manual page 159

11) Hot water setting (Level 2)
Rejection conditions
Setting start operation method
Setting change operation method : After entering the setting start operation mode, operating the UP
Example: 

Setting confi rm operation method : After entering the setting start operation or setting change operation
Setting cancel operation method
Setting range
0 No discharge
1 Hot water discharge thermostat off temperature
~ to
99 •
12) Oil change display setting (Level 2)
Rejection conditions
Setting start operation method
Setting change operation method : After entering the setting start operation mode, operating the UP
Example: 

Setting confi rm operation method : After entering the setting start operation or setting change operation
Setting cancel operation method
Setting range
0 Inspection and error
1 None
2 Error only
3 Inspection only
13) Single phase setting (Level 2)
Rejection conditions
Setting start operation method
Setting change operation method : After entering the setting start operation mode, operating the UP
Example: 

Setting confi rm operation method : After entering the setting start operation or setting change operation
Setting cancel operation method
Setting range
0 •
1 Single phase
: Not accepted during indoor operation
: Press the SET (S007) key for one second.
(S005) and DOWN (S006) keys makes it possible to change the setting
values. (TEST/WARNING LED light)
: When pressing the UP (S005) key
: When pressing the DOWN (S006) key
completed, press the SET (S007) key for one second. (TEST/
WARNING LED off)
: Press the HOME (S004) key for one second before confi rming setting.
: 00 to 99
: Not accepted during indoor operation
: Press the SET (S007) key for one second.
(S005) and DOWN (S006) keys makes it possible to change the setting
values. (TEST/WARNING LED light)
: When pressing the UP (S005) key
: When pressing the DOWN (S006) key
completed, press the SET (S007) key for one second. (TEST/
WARNING LED off)
: Press the HOME (S004) key for one second before confi rming setting.
: 00 to 03




: Not accepted during indoor operation
: Press the SET (S007) key for one second.
(S005) and DOWN (S006) keys makes it possible to change the setting
values. (TEST/WARNING LED light)
: When pressing the UP (S005) key
: When pressing the DOWN (S006) key
completed, press the SET (S007) key for one second. (TEST/
WARNING LED off)
: Press the HOME (S004) key for one second before confi rming setting.
: 00 to 01


V–40


~
