5) Error Data Display (Level 2)
During error log code display, pressing the SET (S007) key for one second or more activates the error data
display at that time.
Example: — Pressing the SET (S007) key →
Pressing the SET (S007) key again for one second or more, or when there are no operations for 10 minutes,
returns to the normal display.
Example: — Pressing the SET (S007) key →
Data is displayed by selecting with the UP (S005) and DOWN (S006) keys.
Data display example
Outdoor unit data
Indoor unit data
Data from 5, 10 and 15 seconds before is identifi ed as follows.
The data displayed is as follows:
● Outdoor Unit Data
Data
code
None Date of malfunction
None Time of malfunction
1
Engine operation time
2
Engine operation count
3
Starter operation time
4
Starter operation count
5
6
7
8
Clutch 2 time
9
Clutch 2 count
A
b
c
d
E
F
G
H
i
J
K
L
n
Beyond this point is data
Data code
From the second point is data.
Up until the second point is data code.
Up until the fi rst point are indoor unit numbers.
From the second point is data.
Up until the second point is data code.
Up until the fi rst point is identifi cation of data R5, b10 and C15 seconds before.
Data name
V–16
Display
Unit
examples
YYMMDD
HHMMSS
Hr
Times
Seconds
Times
Remarks
April 01, 2012
08:19:41
12,345 hours
2,345 times
234 seconds
1,345 times
2,000 hours
200 times