Advertisement
Section 5: Maintenance & Lubrication
72307
BLADE ROTATION: CW
BLADE BOLT: RH THREADS
22374
Blade Removal & Installation
Figure 5-3
19327
Blade Sharpening
Figure 5-4
3/21/19
Table of Contents
BLADE ROTATION: CCW
BLADE BOLT: LH THREADS
Blade Rotation
Figure 5-2
19046
Refer to Figure 5-5:
4. Check blade balance by positioning the blade
horizontally on a nail or shaft through the blade's
center hole. If either end of blade rotates downward,
grind (remove) metal on that end until blade will
balance horizontally on the nail. The blade is
properly balanced when neither end drops. Balance
of a blade is generally maintained by removing an
equal amount of material from each end of the blade.
BLADE ROTATION: CCW
BLADE BOLT: LH THREADS
HORIZONTAL
NAIL OR SHAFT
Blade Balancing
Figure 5-5
AFM3011 All-Flex Grooming Mower 315-783M
37
Advertisement
