Advertisement
Important Safety Information
Important Safety Information
Safety Labels
Your All-Flex Grooming Mower comes equipped with all safety
labels in place. They were designed to help you safely operate
your equipment. Read and follow their directions.
1.
Keep all safety labels clean and legible.
2.
Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3.
Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
72274
6
AFM3011 All-Flex Grooming Mower 315-783M
Table of Contents
make sure the correct safety labels are included in the
request.
4.
Refer to this section for proper label placement. To install
new labels:
a.
Clean surface area where label is to be placed.
b.
Spray soapy water onto the cleaned area.
c.
Peel backing from label and press label firmly onto the
surface.
d.
Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
818-558C
Warning: General Warnings (1 Place)
838-094C
Warning: High Pressure Fluid Hazard (1 Place)
3/21/19
Advertisement
