Table of Contents
Advertisement
Smart SAM2S User Guide V1.4
9 Firmware Upgrade
9.1 Firmware Upgrade for the 2G Module
The module's firmware can be upgraded over the serial or USB port using the dedicated Upgrade Program
running on PC, if using USB ,the 2G module's driver must be installed on the PC beforehand.
9.2 Firmware Upgrade for the Cortex M3 ARM Processor
The processor's firmware can be upgraded over the serial port or JTAG port using the LM Flash Programmer
running on PC.
Firmware and parameters can be upgraded over the serial port, GPRS, CSD or SMS (parameters only)
using SAM3X Terminal program running on PC.
22
Ver1.4
Advertisement
Table of Contents
Need help?
Do you have a question about the SMART SAM2S and is the answer not in the manual?