Table of Contents
Advertisement
9.Firmware upgrade
9.1 Firmware upgrade for the 3G module
The module's firmware can be upgraded over the serial or USB port using the dedicated Upgrade
Program running on PC, if using USB ,the 3G module's driver must be installed on the PC beforehand.
9.2 Firmware upgrade for the Cortex M3 ARM processor
The processor's firmware can be upgraded over the serial port or JTAG port using the LM Flash
Programmer running on PC.
Firmware and parameters can be upgraded over the serial port, GPRS, CSD or SMS (parameters only)
using SAM3S Terminal program running on PC.
Intercel Pty. Ltd.
A.C.N. 007 077 161
33 Glenvale Crescent
Mulgrave VIC. Australia 3170
Email :
intercel@intercel.com.au
Internet :
www.intercel.com.au
Ph : 61 3 9239 2000 Fax : 61 3 9561 2614
22
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart SAM3S and is the answer not in the manual?