Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Intercel SAM3Gplus
Summary of Contents for Intercel SAM3Gplus
- Page 1 SAM3Gplus User Guide V2.5 SAM3Gplus User Guide Ver2.5...
- Page 2 Updated section 5 and section 8 26/10/2007 Updated section 8.2.a 26/10/2007 Updated section 1,5,7 and 8 24/03/2009 Updated for SAM3G plus 27/04/2012 Updated for LED indicator 18/04/2013 Updated serial cable 17/05/2013 Updated bands 15/07/2013 Updated Intercel logo and phone number 08/10/2013 Updated new packaging Ver2.5...
-
Page 3: Table Of Contents
SAM3Gplus User Guide V2.5 Contents Introduction ................................2 Safety Precautions .............................3 Radio Frequency Exposure - SAR ........................4 WEEE Directive 2002/96/EC, Disposal of Old Electronic Equipment ............5 Packaging ................................6 5.1 Contents ................................6 5.2 The Packaging Box ............................6 5.3 The Production Label ............................7 Functionality ................................8... -
Page 4: Introduction
1900MHz and a quad-band WCDMA/HSDPA : 850MHz, 900MHz,1900MHz, 2100MHz The SAM3Gplus is designed for both mobile and fixed M2M applications. It has an RJ45 socket for both input voltage and serial RS232 signals, a MiniB USB connector, a SMB-Jack for antenna connection, a SIM holder and an LED indicator. -
Page 5: Safety Precautions
SAM3Gplus User Guide V2.5 2 Safety Precautions The following safety precautions must be observed whenever the SAM3Gplus modem is in operation or in service. Failure to comply with these precautions violates the safety standards of the design, manufacture and intended use of the product Switch off the SAM3Gplus modem : ... -
Page 6: Radio Frequency Exposure - Sar
This is because the transceiver is designed to use minimum power to connect to the network. The SAM3Gplus modem is approved to use in applications where the antenna is placed more than 21cm from the body. -
Page 7: Weee Directive 2002/96/Ec, Disposal Of Old Electronic Equipment
It must be placed at an appropriate collection point for the recycling of electrical and electronic equipments. By ensuring the correct disposal of this equipment, it will help the environment and human health. Recycling will help to conserve the natural resources. The SAM3Gplus product is RoHS compliant Ver2.5... -
Page 8: Packaging
The data cable is 2m long The label size is 50mm x 30mm A Power supply is available on request. It is recommended that the SAM3Gplus is powered using a 12Vdc/1A power supply. Various antennas are also available on request. Please make sure the correct antenna is used to get optimised performance from the SAM3Gplus (see section 7.e. -
Page 9: The Production Label
IMEI 352679010 049570 : Intercel Pty Ltd Made by Part number CELSAM3GQXSER The production part number is located at the back of the SAM3Gplus, which includes: The product model The software version The hardware version The IMEI number The manufacturer The part number Ver2.5... -
Page 10: Functionality
6 Functionality 6.1 General The SAM3Gplus modem consists of an RJ45 connector for serial port and input power, a miniB USB connector, an SMB Jack antenna connector and a SIM holder. The LED indicator, located on top, indicates the SAM operating status. -
Page 11: Rj45 Socket
SAM3Gplus User Guide V2.5 6.2 RJ45 Socket Signals Description Input voltage 5Vdc - 30Vdc Data Carrier Detect Data terminal Ready Common Ground Serial Data out of the SAM Serial Data into the SAM Clear to Send Ready to Send 6.3 MiniB USB Connector... -
Page 12: Smb-Jack 50Ω Antenna Connector
LED on steady: The SAM3Gplus is searching for network. LED flashes very slowly: No SIM card inserted. LED flashes regularly: The SAM3Gplus is on and connected to the network, but not transmitting or receiving data. LED flashes at fast rate : The SAM3Gplus is in use (transmit/receive data) LED is off : No power Ver2.5... -
Page 13: Data Cable
The data cable is 2m long. It consists of an RJ45 plug, a DB9-female connector and a 2-wire input power. Signals RJ45 Description Data Carrier Detect Serial Data out of the SAM3Gplus Serial Data into the SAM3Gplus Not Used Common Ground Clear to Send... -
Page 14: Electrical Characteristics
SAM3Gplus User Guide V2.5 7 Electrical Characteristics 7.1 Power Consumption Vin = 12Vdc HSDPA/WCDMA GSM/GPRS/EDGE Idle mode 31mA 31mA Standby mode 105mA 80mA Average In-Use: 2Mbps@10dBm Tx 158mA HSUPA 7.2Mbps Rx 158mA HSDPA 384Kbps@10dBm Tx 137mA WCDMA GSM CSD (9600bps) -
Page 15: Conducted Transmit Power Tolerances
SAM3Gplus User Guide V2.5 7.4 Conducted Transmit Power Tolerances Parameter Conducted Tx Power Note GSM850 & GSM900 CS plus32dBm ±1dBm GMSK mode, connectorized (Cl.4) plus27dBm ±1dBm 8PSK mode, connectorized (Cl.E2) DCS1800 & PCS1900 CS plus29dBm ±1dBm GMSK mode, connectorized (Cl.1) plus26dBm ±1dBm... -
Page 16: Operation
SAM3Gplus User Guide V2.5 8 Operation The SAM3Gplus can support either the USB port or the Serial RS232 port. The port configuration is done at the point of sale. Do not operate these 2 ports at the same time ! 8.1 Using The USB Port... -
Page 17: Using The Serial Rs232 Port
CTS. There is an option for RI (Ring Indicator) signal instead of DTR signal. This configuration allows any external controller to communicate with the SAM3Gplus at 115200bps over the serial port. The external device can set up the SAM3Gplus modem using AT commands, can transfer Circuit- switched data or Packet-switched data. - Page 18 SAM3Gplus User Guide V2.5 Notes Ver2.5...
- Page 19 Should Buyer purchase or use intercel...