GSM, GPRS, UMTS and HSPA+ connectivity. The Smart SAM3S is designed for both mobile and fixed M2M applications. It has an RJ45 socket for input voltage and the serial RS232 signals, an FME-male for antenna connection, a SIM holder and an LED indicator.
This is because the transceiver is designed to use minimum power to connect to the network. The Smart SAM3S modem is approved to use in applications where the antenna is placed more than 21cm from the body.
Page 5
It must be placed at an appropriate collection point for the recycling of electrical and electronic equipments. By ensuring the correct disposal of this equipment, it will help the environment and human’s health. The recycling will help to conserve the natural resources. The Smart SAM3S product is RoHS compliant...
The Data cable is 2m long The Label size is 50mm x 33mm The Power supply is available on request. It is recommended that the Smart SAM3S is powered using a 12Vdc/1A power supply. Antennas are also available on request. Please make sure the correct antenna is used to get optimised...
352679010 049570 : Intercel Pty Ltd Made by : ASSSMRTS3S Part number The production part number is located at the back of the Smart SAM3S, which includes: The product model The software Version The Hardware Version The IMEI number The manufacturer...
6. Functionality General The Smart SAM3S modem consists of an RJ45 socket for serial port and input power, an FME male antenna connector and a SIM holder. The LED indicator, located next to the SIM holder, indicates the Smart SAM3S operating status. It also has a USB port to download firmware.
Input voltage 5Vdc - 32Vdc Data Carrier Detect DTR/RI Data terminal Ready/Ring Indicator Common Ground Serial Data out of the Smart SAM3S Serial Data into the Smart SAM3S Clear to Send Ready to Send 7.1 The FME-Male 50Ω antenna connector The FME male antenna connector is a 50Ω...
The data cable is 2m long. It consists of an RJ45 plug, a DB9-female connector and a 2-wire input power. Signals RJ45 Description Data Carrier Detect Serial Data out of the Smart SAM3S Serial Data into the Smart SAM3S Not used Common Ground Ready to Send...
Intercel Pty. Ltd. A.C.N. 007 077 161 33 Glenvale Crescent Mulgrave VIC. Australia 3170 Email : intercel@intercel.com.au Internet : www.intercel.com.au Ph : 61 3 9239 2000 Fax : 61 3 9561 2614 8. THE SAM3S TCP/IP Operation The SAM3S has a MCU (Microcontroller) to control the 3G module PHS8-P, the SAM3S can be operating...
Intercel Pty. Ltd. A.C.N. 007 077 161 33 Glenvale Crescent Mulgrave VIC. Australia 3170 Email : intercel@intercel.com.au Internet : www.intercel.com.au Ph : 61 3 9239 2000 Fax : 61 3 9561 2614 TCP AT Command: Socket connection allows a user from the host computer to send AT commands to the modem and receive its responses, socket will be disconnected after 5 minutes of no activity, and socket also can be used for remote firmware update.
Page 15
Intercel Pty. Ltd. A.C.N. 007 077 161 33 Glenvale Crescent Mulgrave VIC. Australia 3170 Email : intercel@intercel.com.au Internet : www.intercel.com.au Ph : 61 3 9239 2000 Fax : 61 3 9561 2614 DATALEN=Serial port data bits 7 or 8 PARITY= NONE or ODD or EVEN SAMMODE=0 for standard modem, 1 for PSD mode, 2 for CSD mode.
Page 17
DDNSPASSWORD=DDNS account password DDNSSERVER=DDNS server DDNSSTRING: Only need to change from default in some circumstances with Intercel support DDNSAUTH: Only need to change from default in some circumstances with Intercel support DDNSAGENT: Only need to change from default in some circumstances with Intercel support PDNSIP=Primary DNS, leave blank if not using your own DNS server, not a requirement for DDNS.
Page 18
Ph : 61 3 9239 2000 Fax : 61 3 9561 2614 DDNSSERVER: dynupdate.no-ip.com DDNSSTRING: GET /nic/update?hostname=%s&myip=%s HTTP/1.0 DDNSAUTH: Authorization: Basic %s DDNSAGENT: User-Agent: SAM3S/1.0 intercel@intercel.com.au PDNSIP: 8.8.8.8 SDNSIP: 8.8.4.4 DNSTTL: 240 AT$DDNSTEST Use to force a manual updating of IP to the DDNS server, all required parameters must be set beforehand.
300s period, modem will not able to decode AT$ commands sending to it over SMS. 8.3 CSD Call Escape Sequence During CSD call to the Smart SAM3S modem, send three consecutive EscEscEsc or hex number sequence 0x1B 0x1B 0x1B to switch the modem between data mode and remote AT commands mode.
Intercel Pty. Ltd. A.C.N. 007 077 161 33 Glenvale Crescent Mulgrave VIC. Australia 3170 Email : intercel@intercel.com.au Internet : www.intercel.com.au Ph : 61 3 9239 2000 Fax : 61 3 9561 2614 9.Firmware upgrade 9.1 Firmware upgrade for the 3G module The module’s firmware can be upgraded over the serial or USB port using the dedicated Upgrade...