Design Parameters - Quantech QTC2015T Manual

Design Parameters

QUANTECH
LEAVING WATER
MODEL
TEMPERATURE (°F)
MIN
015T 40
020T 40
025T
40
030T 40
035T 40
040T 40
045T 40
LEAVING WATER
MODEL
TEMPERATURE (°C)
MIN
015T 4.4
020T 4.4
025T 4.4
030T 4.4
035T
4.4
040T 4.4
045T 4.4
NoTES:
1. For leaving brine temperature below 40°F (4.4°C), contact your nearest Quantech Sales Office for ap-
plication requirements.
2. For leaving water temperature higher than 55°F (12.8°C), contact the nearest Quantech Sales Office for
application guidelines.
3. The evaporator is protected against freezing to -20°f (-28.8°C) with an electric heater as standard.
4. for operation at temperatures below 25°f (-3.9°C), the optional low Ambient Kit will need to be installed
on the system (for QTC2040T-045T models only).
5. for operation at temperatures above 115°f (46.1°C), the optional high Ambient Kit will need to be in-
stalled on the system.
QTC2 ENGLISH
COOLER
FLOW (GPM)
MAX MIN MAX
55 10
55 10
55 10
55 10
55 40
55 40
55 60
QTC2 SI UNITS
COOLER
FLOW (L/S)
MAX MIN MAX
12.8 0.6
12.8 0.6
12.8 0.6
12.8 0.6
12.8 2.5
12.8 2.5
12.8 3.8
FORM QTC2-eg1 (515)
AIR ON
CONDENSER (°F)
MIN MAX
150 0
150 0
150 0
150 0
200 0
200 0
300 0
AIR ON
CONDENSER (°C)
MIN MAX
9.5 -17.7
9.5 -17.7
9.5 -17.7
9.5 -17.7
12.6 -17.7
12.6 -17.7
18.9 -17.7
125
125
125
125
125
125
125
51.7
51.7
51.7
51.7
51.7
51.7
51.7
13