Ricoh Pro 907 Operating Instructions And Troubleshooting page 78

4. Appendix
12. Using the supplied scale, measure the distance between the sheet's right and bottom sides
and the Frame Image. The optimum aligned distance is 2 mm (0.08 inches). Use the following
steps to adjust the print position according to the degree of misalignment.
4
13. Press [Back to Settings].
14. Press [0101 Adjust Image Position Across Feed Direction] or [0102 Adjust Image Position
With Feed Direction].
[0101 Adjust Image Position Across Feed Direction]: Vertical alignment relative to paper feed
direction.
[0102 Adjust Image Position With Feed Direction]: Horizontal alignment relative to paper feed
direction.
15. Select the paper tray you want to adjust, and then specify the adjustment value using the
[ ] and [ ].
16. Press [OK], and then press [Back].
17. Repeat steps 7 to 16 until the distances between the paper sides and the Frame Image are
between 1.5 and 2.5 mm (0.06 and 0.10 inches).
76
BQL070S