Ricoh Pro 907 Operating Instructions And Troubleshooting page 41

Problem
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Z-Folded paper is not
properly aligned.
Paper is bent.
Sheets are feeding in
together, resulting in jams.
Paper becomes creased.
Paper becomes creased.
Edges of sheets are creased. The paper is damp.
Cause
The paper is wrinkled or has
been folded/creased.
Printed paper is being used.
Sheets are sticking together.
The auxiliary tray is not set.
Paper may be bent when is
ejected from the Finisher
Upper Tray.
Sheets are sticking together.
The paper is damp.
The paper is too thin.
Other Printing Problems
Solution
Use recommended paper only and be
sure its storage environment meets the
recommended temperature and
humidity conditions. For details about
recommended paper and the proper
way to store it, see "Recommended
Paper Sizes and Types" and "Paper
Storage", About This Machine
Do not load sheets that have already
been printed onto by another machine.
Fan the sheets thoroughly before
loading them. Alternatively, feed the
sheets into the machine one at a time.
Set the auxiliary tray for the Finisher Shift
Tray or Folding Unit Tray. For details
about how to add the auxiliary tray, see
p.78 "When Z-folded Paper Is Not
Properly Aligned".
Change the output tray to the Finisher
Shift Tray.
Fan the sheets thoroughly before
loading them. Alternatively, feed the
sheets into the machine one at a time.
Use paper that has been stored in the
recommended temperature and
humidity condition. See "Paper
Storage", About This Machine
Use recommended paper. See
"Recommended Paper Sizes and
Types", About This Machine
Use paper that has been stored in the
recommended temperature and
humidity condition. See "Paper
Storage", About This Machine
2
.
.
.
.
39