Ricoh Pro 907 Operating Instructions And Troubleshooting page 29

Message
"Only one set can be printed
due to insufficient HDD
memory."
"Paper settings of the
Interposer Lower Tray do not
match the specified paper
size. Change the paper
settings of Interposer Lower
Tray to the following paper
size, or press [Job Reset] to
cancel printing."
"Paper settings of the
Interposer Tray do not match
the specified paper size.
Change the paper settings of
Interposer Tray to the
following paper size, or press
[Job Reset] to cancel
printing."
Cause
Due to insufficient hard disk
space, only one set could be
made.
The paper settings configured
for the selected interposer
tray do not match the
specified paper size.
The machine was unable to
automatically select an
interposer tray containing
paper of the required size.
Messages Displayed When Using the Printer Function
Solution
Reset the print job and split it up into
smaller jobs that do not exceed the
maximum number of pages that can be
sent per job. Use the table below to find
the maximum number of pages that can
be sent per job. Note that the numbers
in the table are based on average print
jobs; the actual number of pages you
can send per job will depend on the
content of the print images.
1
• A4/Letter (8 / × 11)
2
Single-Sided Printing: Up to 1,500
pages
Duplex Printing: Up to 3,000
pages
• A3/11 × 17
Single-Sided Printing: Up to 1,500
pages
Duplex Printing: Up to 2,000
pages
Configure the settings of the displayed
paper to match the specified paper size.
Alternatively, press [Job Reset] to cancel
the print job. See "If Paper Size and Type
Errors Occur", Printer Reference
details about the supported paper sizes,
see "Recommended Paper Sizes and
Types", About This Machine
Configure the settings of the displayed
paper to match the specified paper size.
Alternatively, press [Job Reset] to cancel
the print job. See "If Paper Size and Type
Errors Occur", Printer Reference
details about the supported paper sizes,
see "Loading Paper", About This
Machine .
2
. For
.
. For
27