Function Description; Technical Data - FLORABEST FKS 2200 F3 Translation Of The Original Instructions

GB
F
23 Bar bolt
24 Tensioning plate
G
25 Sprocket
26 Tab
J
27 Oil passages
28 Fixing screw
29 Clamping screw bolt

Function description

The chainsaw is driven by an electric mo-
tor. The circulating chain is led around a
saw bar (guide rail).
The tool is fitted with a rapid-action chain-
tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various pro-
tection fittings for the protection of the user.
Refer to the following descriptions for the
function of control elements.

Technical Data

Electrical chainsaw ................ FKS 2200 F3
Rated input
voltage U ................. 230-240 V~, 50 Hz
Input power P ............................2200 W
Safety class ......................................
Protection category...........................IP20
Chain speed v .........................15.3 m/s
0
Weight (without guide rail and chain) .4.4 kg
Weight (with guide rail and chain) ..5.3 kg
Oiltank ...........................approx. 190 ml
Chain ..........................Oregon 91P057X
Chrome cutting teeth, low-kickback
Chain bar ....... Oregon 16" Double-Guard
......................... 160SDEA041 - 112364
Chain link separation ................... 10 mm
Chain width ............................... 1.3 mm
6 0
Teeth of the sprocket chain wheel ........... 7
Length of the chain bar ............... 460 mm
Sawing length ........................... 395 mm
Acoustic pressure level
(L
) .................. 84.9 dB (A); K
pA
Sound power level (L
measured .. 107.7 dB (A); K
guaranteed ......................... 110 dB(A)
Vibration (a ) .... 7.612 m/s
h
Noise and vibration values were determined
according to the standards and stipulations
mentioned in the declaration of conformity.
Technical and optical changes can be
carried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
II value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
= 3 dB
pA
)
WA
= 2.58 dB
WA
; K= 1.5 m/s
2 2