Care And Maintenance - Carrier CDF-20Q7 Owner's Manual

CARE AND MAINTENANCE

Removing the collected water
2. Continuous draining
● Water can be automatically emptied into a floor drain by
attaching the unit with a water hose(not included).
● Remove the rubber plug from the back drain hose outlet.
Attach a drain hose(ID=13.5mm) and lead it to the floor drain
or a suitable drainage facility(see Fig.7).
● Make sure the hose is secure so there are no leaks.
● Direct the hose toward the drain, making sure that there are no
kinks that will stop the warter flowing.
● Place the end of the hose into the drain and make sure the end
of the hose is level or down to let the water flow smoothly. Do
never let it up.
● Make sure the water hose is lower than the drain hose outlet.
● Select the desired humidity setting and fan speed on the unit
for continuous draining to start.
NOTE: When the continuous drain feature is not being used,
remove the drain hose from the outlet and reinstall the rubber
plug.
Attach the hose to the drain hose
outlet.
19
CARE AND MAINTENANCE
remove the rubber plug
Fig.7