Front-To-Back Leveling - Craftsman C950-60106-1 Setup Manual

FRONT-to-BACK LEVELING

Important: Side-to-side leveling must be
performed fi rst.
Arrange the blades so it faces front to back. Using a
measuring tool, measure:
(a) - the distance between the ground and the
rear tip of one of the rear blades.
(b) - the distance between the ground and front
tip of the center blade.
This should be the same as measurement (a).
b
IF AN ADJUSTMENT IS NEEDED:
6
To LOWER the front of mower (b).
Turn locknuts (c) counterclockwise. Locknuts
must be turned evenly on both sides to keep deck
level (Side-to Side).
Recheck measurement (b). When correct, turn jam
nuts (d) counterclockwise against the trunnion (e),
to secure.
a
To RAISE front of mower (b).
Turn jam nuts (c) clockwise. Nuts must be turned
evenly on both sides to keep deck level (Side-to-
Side). Turn locknuts (d) clockwise against the
trunnion (e) to secure.
Recheck measurement (b).
For answers to your questions about
this product, call:
1-800-659-5917
Sears Craftsman Help Line
5 am - 5 pm, Mon - Sat
e
c
c
d
b
d
c
e
e
e
d
90 lb-ft
(122.4 Nm)
d
c
90 lb-ft
(122.4 Nm)