Charge Battery - Craftsman C950-60106-1 Setup Manual

Zero-turn with electric start
Table of Contents

Advertisement

Available languages

Available languages

Charge Battery

WARNING
RISK OF BATTERY EXPLOSION FROM HYDROGEN
GAS MAY RESULT IN SERIOUS INJURY OR DEATH.
ALWAYS wear safety glasses for your protection
while handling the battery.
To avoid an explosion, keep fl ames and sparks
away from the battery, especially while charging.
Battery acid causes severe burns. Avoid contact
with skin.
Battery posts, terminals, and related accessories
contain lead and lead compounds - chemicals
known to the State of California to cause cancer
and reproductive harm. Wash hands after handling.
Note: If the unit is being put into service after the
month and year indicated on the battery date tag
(located on top of battery) charge the battery before
use.
Note: Charge battery according to the instructions
provided by the charger manufacturer.
Note: Read and understand any warnings by the
battery manufacturer.
4
Removing Tractor from Shipping
Pallet
See Operator's Manual for starting, stopping, and
operating information before driving tractor off shipping
pallet.
Important: When driving tractor off shipping pallet
raise the mower deck height to its highest cutting
position.
Check -
ROLL RELEAS S
Note: The roll (transmission) release levers (a) may
come from the factory in the RELEASE position.
The tractor will not drive if leavers are in the release
position.
WARNING
DO NOT use roll release unless engine is OFF.
Adjustment
The ground speed levers must be adjusted prior to use.
Refer to the "Ground Speed Lever Adjustment" section
in the Operator's
a
a

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C950-60106-1 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

C950-60106-0C950-60107-0C950-60107-1Zts 7000

Table of Contents