Chapter 5. Using the web interface
Use this information to help you navigate the FPC web-based graphical user
interface and manage components in the NeXtScale n1200 Enclosure.
Starting the web interface
Start the FPC web-based graphical user interface to manage components in the
chassis.
You can access the fan power control web interface through an Ethernet connection
by establishing a session with the IP address of the FPC. If you are connecting to
the FPC for the first time, you might have to change the Internet protocol
properties on the client computer.
Open your web browser and enter the IP address of the FPC in the address or
URL field.
v If the IP address was assigned through a DHCP server, get the IP address from
v The FPC has the following default settings:
Resetting the FPC to manufacturing defaults
You can restore the primary FPC to manufacturing defaults through the FPC web
interface.
Read the safety information in "Safety" on page v and "Installation guidelines" on
page 25.
To reset the FPC to manufacturing defaults, complete the following steps.
Press the reset button for more than 4 seconds to reset the FPC.
© Copyright Lenovo 2015
your network administrator.
– IP address: 192.168.0.100
– Subnet: 255.255.255.0
– User ID: USERID (all capital letters)
– Password: PASSW0RD (note the number zero, not the letter O, in
PASSW0RD)
73