Replacing The Battery In The Fan Power Control - Lenovo NeXtScale n1200 Installation And Service Manual

5. Using your fingernail, press the battery retaining clip. The battery should pop
Figure 23. Battery removal
6. Lift the battery from the socket.
7. Dispose of the battery as required by local ordinances or regulations. See the

Replacing the battery in the fan power control

The following notes describe information that you must consider when replacing
the battery in the fan power control.
v When replacing the battery, you must replace it with a lithium battery of the
v To order replacement batteries, call 1-800-426-7378 within the United States, and
v After you replace the battery, you must reconfigure the fan power control time
v To avoid possible danger, read and follow the following safety statement.
Statement 2
CAUTION:
When replacing the lithium battery, use only Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with the same module type
made by the same manufacturer. The battery contains lithium and can explode if
not properly used, handled, or disposed of.
Do not:
v Throw or immerse into water
v Heat to more than 100°C (212°F)
v Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To install the replacement battery, complete the following steps:
38
Lenovo NeXtScale n1200 Enclosure: Installation and Service Guide
free.
Attention: Do not lift the battery by using excessive force. Failing to remove
the battery properly may damage the socket on the fan power control. Any
damage to the socket may require replacing the fan power control.
Environmental Notices and User's Guide on the Documentation CD for more
information.
same type from the same manufacturer.
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada,
call your Lenovo marketing representative or authorized reseller.
settings.