Kipp & Zonen LOGBOX SE Instruction Manual page 38


ModemOnDuration [0...30] – interval how long modem will wait connected to GSM network for a call; in minutes.
Example ModemOnDuration 30
 ModemPIN [number] – modem PIN number (max 10 digits)
Example ModemPIN 485351 (configuring PIN number of inserted SIM card into the GSM modem to 485351)
 ModemNumber [number] – number of remote modem where GSM data will be transferred (if ModemGPRS 0 was set)
Example ModemNumber 0265428834

APN [string]– access point of GSM/GPRS provider
Example APN internet (configuring APN to string internet)
 IP [string]– IP address for sending emails or IP address of FTP server
Example IP 213.151.208.170 (configuring IP to 213.151.208.170)
 EmailFrom [string]– sender address for the email
Example EmailFrom

EmailTo [string]– recepient address for the email. Here data will be received.
Example EmailTo
physicus@physicus.eu
 UserName [string]– user name for authorization on smtp server or FTP server. Minimum 5 characters. If less than 5
characters are used, access without authorization is activated (UserName and Password are not used)
Example UserName
data@physicus.eu
 Password [string]– password for authorization on smtp server or FTP server. Minimum 4charactres.

If less than 4 characters are used, access without authorization is activated
Example Password data (configuring password to data)
 TimeServer [string]– time server for time synchronization.
Example TimeServer time.nist.gov (configuring time server to time.nist.gov)
 TimeZone [-12...12]– local time zone.
Example TimeZone -5 (configuring time zone to -5 hours from TimeServer)
 Ftp [0,1]- enable/disable FTP data transfer.
Example Ftp 0 (configuring data transfer to email)
 ModemDetail [0,1] – enables detailed messages from modem. Used only for problem solving with remote data transfer.
(configuring sender address to Testing@physicus.eu)
Testing@physicus.eu
(configuring recipient address to physicus@physicus.eu)
(configuring user name to data@physicus.eu)
38