Liveview - Kipp & Zonen LOGBOX SE Instruction Manual

9.10 LIVEVIEW

Clicking LiveView opens the window where live logged data can be viewed.
The switch in the LOGBOX SE must in the On position for logging and Start will start the actual live view and as expected
Stop will stop it.
Measure is for future use.
--- means: No data received or this input was not selected in the Measure box in the Analog, Digital or Serial tab
Leaving the LiveView window doesn't stop the logging and the LiveView will be resumed when the LiveView window is
selected again.
Do not forget to click Stop as functions like Send are disabled when LiveView is active.
29