Assembly Instructions - Briggs & Stratton 074025-00 Manual

Assembly Instructions

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 5 minutes
Tools Required for Assembly (not included): 11/16 in. Open Wrench or Adjustable Wrench.
ASSEMBLY INSTRUCTIONS
1. Removable handle assembly
• Insert handle (K) into the fixed sleeves. Align the tapped holes (K1) with
the holes on the sleeve.
• Fasten the handle to the sleeve using the screws (AA).
Hardware Used
AA
M6 × 14 Screw
2. Wheel assembly
• Insert the bolt (BB) through one of the wheels (L),slide on washer (CC).
• Insert the bolt (BB) through the bracket on the bottom of the tank
assembly. Slide on washer (CC), spring washer (DD) and tighten the nut
(EE). Repeat this step for the second wheel.
• Once assembled, roll the air compressor to test the operation of the
wheels. Periodically check to ensure that wheel and the hardware is secure.
Hardware Used
BB
M10 Bolt
CC Ø10 Washer
DD
Ø10 Spring Washer
EE
M10 Nut
3. Air filter assembly
• Screw the air filter (M) onto the pump.
x 2
x 2
x 2
x 2
x 2
1
AA
K1 K1
2
3
9