Kalfire W60/51Fl Installation And Instructions Manual page 9

WARNING The floor on which the fireplace is placed must
have sufficient load-bearing capacity (for the weight of the
fireplace, see Table 5).
DANGER! The floor on which the fireplace is placed must
consist of non-flammable materials. This is because hot ash
and sparks can fall on the floor. This also goes for the walls
behind and adjacent to the fireplace and the ceiling.
CAREFUL The fireplace and the surround have different
expansion rates. if a platform is used, the fire must be
at least 4 mm clear of the platform in order to prevent
damage. Too little room causes undesirable material
tension.
Inspection
Fireplace
W45/48F 5 5
W53/50R 10 10
W60/51F 5 5
W65/38C 5 5
W66/48S
10 10
W70/33F 10 10
W71/62F 10 10
W80/52T 10 -
W85/40F 5 5
W90/47C 10 10
W90/47S 10 5
W100/61F 10 10
W105/47F
5 5
W105/47T 10 -
Table 1: prescribed insulation thickness between the fireplace and
combustible materials
9
Isorath 1000
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 -
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 2.7
9 * 2.6 -
Promasil
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 -
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 2.1
5.3 * 2 -
Mineral wool (AGI Q 132)
4.1 * 5 5
4.1 * 10 10
4.1 * 5 5
4.1 * 5 5
4.1 * 10 10
4.1 * 5 5
4.1 * 5 5
4.1 * 5 -
4.1 * 5 5
4.1 * 5 10
4.1 * 5 5
4.1 * 5 5
4.1 * 5 5
4.1 * 5 -
9 *
9 *
9 *
9 *
9 *
9 *
9 *
9 *
9 *
9 *
9 *
9 *
9 *
9 *