Replacing The Palm-Rest Assembly; Procedure; Post-Requisites - Dell P57F003 Service Manual

GUID-C338CD8A-D6B9-47AE-9629-3FBE505948D9
Replacing the palm-rest
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-D30CEBC2-E33B-40C2-9178-352A0FACA7FC

Procedure

1 Align the screw holes on the palm-rest assembly with the screw holes on the
computer base and snap the palm rest into place.
2 Replace the two screws (M2x5) that secure the palm-rest assembly to the
computer base.
3 Slide the touch-pad cable and power-button cable into the connectors and close
the latches to secure the cables.
4 Close the display and turn the computer over.
5 Replace the four screws (M2x5) that secure the palm-rest assembly to the
computer base.
GUID-F0AB28D4-8CF1-4B89-A2DB-A4C976DEDB9C

Post-requisites

1 Replace the keyboard.
2 Follow the procedure from step 4 to step 6 in
3 Replace the battery.
4 Replace the base
48
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
"Replacing the hard
Before
drive".