Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KYLAND Technology KIEN1005
Summary of Contents for KYLAND Technology KIEN1005
- Page 1 KIEN1005 Industrial Ethernet Switch Hardware Installation Manual Kyland Technology Co., Ltd. Publication Date: Jan. 2013 Version: V4.0 Customer Service Hotline: (+8610) 88796676 FAX: (+8610) 88796678 Website: http://www.kyland.com E-mail: support@kyland.com No.: 1.12.02.1010-0...
- Page 2 KIEN1005 Industrial Ethernet Switch Hardware Installation Manual Disclaimer: Kyland Technology Co., Ltd. tries to keep the content of this manual as accurate and as updated as possible. This document is not guaranteed to be error-free, and we reserve the right to amend it without notice to users.
- Page 3 Notice for Safety Operation The product performs reliably as long as it is used according to the guidance. Artificial damage or destruction of the device should be avoided. Before using the device, read this notice carefully for personal and equipment safety. Please keep the manual for further reference. Kyland is not liable to any personal or equipment damage caused by violation of this notice.
- Page 4 Dispose of the device in accordance with relevant national provisions, preventing environmental pollution. In the following cases, please immediately shut down your power supply and contact your Kyland representative: Water gets into the equipment. Equipment damage or shell damage. ...
-
Page 5: Table Of Contents
Contents 1 Product Overview ........................1 2 Structure and Interface ......................2 2.1 Front Panel ........................... 2 2.2 Top Panel ..........................4 3 Mounting ..........................5 3.1 Dimension Drawing ....................... 5 3.2 Mounting Modes and Steps ....................6 3.2.1 DIN-Rail Mounting ......................7 3.2.2 Panel Mounting ....................... -
Page 6: Product Overview
Product Overview 1 Product Overview KIEN1005 includes a series of unmanaged 5-port industrial Ethernet switches developed by Kyland particularly for industrial applications. The series switches are applicable to harsh and hazardous industrial environments with reliable operation due to its high-performance switching engine, solid closed housing, low power consumption, fanless design, overcurrent, overvoltage, and EMC protection for power input, and sound EMC protection of RJ45 ports. -
Page 7: Structure And Interface
To keep ports clean and ensure switch performance, you are advised to purchase the port dustproof shield (optional). 2.1 Front Panel Front Panel of KIEN1005-1S/M-4T Figure 1 Front Panel of KIEN1005-1S/M-4T Table 2 Description of the Front Panel of KIEN1005-1S/M-4T Identifier Description Power LED 100Base-FX Ethernet port connection status LED... - Page 8 Structure and Interface Front Panel of KIEN1005-5T Figure 2 Front Panel of KIEN1005-5T Table 3 Description of the Front Panel of KIEN1005-5T Identifier Description Power LED 10/100Base-T(X) Ethernet port 10/100M 10/100Base-T(X) Ethernet port speed LED (yellow) LINK/ACT 10/100Base-T(X) Ethernet port connection status LED (green)
-
Page 9: Top Panel
Structure and Interface 2.2 Top Panel Figure 3 Top Panel of KIEN1005 Table 4 Description of the Top Panel of KIEN1005 Identifier Description Grounding screw Power terminal block... -
Page 10: Mounting
Mounting 3 Mounting 3.1 Dimension Drawing Figure 4 Dimensions for DIN-Rail Mounting 1 (unit: mm) Figure 5 Dimensions for DIN-Rail Mounting 2 (unit: mm) -
Page 11: Mounting Modes And Steps
Mounting Figure 6 Dimensions for Panel Mounting (unit: mm) Caution: The manual provides two dimensions for DIN-rail mounting. You can follow the dimension and related mounting steps according to the type of DIN rail in use. The figures in this manual are only for reference. ... -
Page 12: Din-Rail Mounting
Mounting 3.2.1 DIN-Rail Mounting DIN-Rail Mounting 1 Step 1: Select the mounting position for the device and guarantee adequate space and heat dissipation for it (dimensions: 36.5mm×120mm×90mm). Step 2: Insert the lower edge of the DIN rail into the bend of the lower hooks of the DIN rail connecting seat. - Page 13 Mounting DIN Rail Dismounting 1 Step 1: As shown in the following figure, pull the device upward and move it in direction 2 until the upper edge of the DIN rail is detached from the upper hooks of the connecting seat. Step 2: Push the device downward until the DIN rail is removed from the connecting seat completely.
-
Page 14: Panel Mounting
Mounting DIN Rail Dismounting 2 Step 1: As shown in the following figure, press the device downward and move the device in direction 1 until the bottom of the device is detached from the DIN rail. Step 2: Pull the device upward and move the device in direction 2 until the device is removed from the DIN rail completely. - Page 15 Mounting Figure 11 Panel Mounting Panel Dismounting Step 1: Loosen the four screws with a screwdriver. Pull the device upward until the four screws are in the Ф6.5 positions in the following figure. Then remove the plate for panel mounting from the four screws to detach the device from the wall or inner wall of the cabinet.
-
Page 16: Connection
Connection 4 Connection 4.1 10/100Base-T(X) Ethernet Port 10/100Base-T(X) Ethernet port is equipped with RJ45 connector. The port is self-adaptive. It can automatically configure itself to work in 10M or 100M state, full or half duplex mode. The port can also adapt to MDI or MDI-X connection automatically. You can connect the port to a terminal or network device with a straight-through or cross-over cable. -
Page 17: 100Base-Fx Ethernet Port
Connection Wiring Sequence Figure 14 Connection Using Straight-through/Cross-over Cable Note: The color of the cable for RJ45 connector meets the 568B standard: 1-orange and white, 2-orange, 3-green and white, 4-blue, 5-blue and white, 6-green, 7-brown and white, and 8-brown. 4.2 100Base-FX Ethernet Port 100Base-FX Ethernet port is equipped with FC/ST/SC connector, and each port consists of TX (transmit) port and RX (receive) port. -
Page 18: Grounding
Connection 4.3 Grounding Grounding protects the device from lightning and interference. Therefore, you must ground the device properly. You need to ground the device before it is powered on and disconnect the grounding cable after the device is powered off. There is a grounding screw on the top panel of the switch. - Page 19 Connection The following figure lists the pin definitions of the 3-pin 3.81mm-spacing plug-in terminal block. Table 6 Pin Definitions of 3-Pin 3.81mm-Spacing Plug-in Terminal Block DC Definition AC Definition PGND PGND Wiring and Mounting Step 1: Ground the device properly according to section 4.3. Step 2: Remove the power terminal block from the device.
-
Page 20: Leds
LEDs 5 LEDs Table 7 Front Panel LEDs State Description The device is connected to power supply and operates properly. Power LED The device is not connected to power supply or operates abnormally. Effective port connection 100Base-FX Ethernet port Blinking Ongoing network activities connection status LED No effective port connection... -
Page 21: Basic Features And Specifications
Basic Features and Specifications 6 Basic Features and Specifications Power Requirements Power Identifier Rated Voltage Range Maximum Voltage Range 12DCW 12-24VDC 9-36VDC 220AC 100-240VAC, 50/60Hz 85-264VAC Terminal block 3-pin 3.81mm-spacing plug-in terminal block Rated Power Consumption Rated power consumption 3.6W (MAX) Physical Characteristics Housing Metal, fanless...
Need help?
Do you have a question about the KIEN1005 and is the answer not in the manual?
Questions and answers