Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KYLAND Technology SICOM3216-16T
Summary of Contents for KYLAND Technology SICOM3216-16T
- Page 1 SICOM3216 Industrial Ethernet Switch Hardware Installation Manual Kyland Technology Co., LTD. Publication Date: Oct. 2011 Version: V1.0 Customer Service Hotline: (+8610) 88796676 FAX: (+8610) 88796678 Website: http://www.kyland.cn E-mail: support@kyland.biz...
- Page 2 SICOM3216 Industrial Ethernet Switch Hardware Installation Manual Disclaimer: Kyland Technology Co., Ltd. tries to keep the content of this manual as accurate and as updated as possible. This document is not guaranteed to be error-free, and we reserve the right to amend it without notice to users.
- Page 3 SICOM3216 User’s Manual-v1.0 Notice for Safety Operation This product performs reliably as long as it is used according to the guidance. Artificial damage or destruction of the equipment should be avoided. Read this manual carefully and keep it for future reference; ...
-
Page 4: Table Of Contents
SICOM3216 User’s Manual-v1.0 Contents 1 Packing List ......................4 2 Product Overview ....................4 3 Structure and Interface ..................5 3.1 Front Panel ....................5 3.2 Top Panel ...................... 9 4 Mounting ......................10 4.1 Dimension Drawing ..................10 4.2 Mounting Steps .................... 11 5 Cable Connection .................... -
Page 5: Packing List
SICOM3216 User’s Manual-v1.0 1 Packing List SICOM3216 Industrial Ethernet Switch Screwdriver 18#AWG yellow-green line Certificate of Quality (including Certificate of Compliance) Note: After unpacking, please check the accessories and the appearance of the equipment. If anything is missing or damaged, please contact us. 2 Product Overview SICOM3216 is a series of green low power consumption industrial Ethernet switch that can be applied extensively in wind power, distribution network... -
Page 6: Structure And Interface
SICOM3216 User’s Manual-v1.0 3 Structure and Interface 3.1 Front Panel SICOM3216-2GX/GE-2S/M-14T Figure 1 Front Panel 1 Table 1 SICOM3216-2GX/GE-2S/M-14T Front Panel Number Diagram Label Description PWR1 Power 1 LED PWR2 Power 2 LED Running LED Ring Ring LED Reset Reset button Console Console interface... - Page 7 SICOM3216 User’s Manual-v1.0 GX1/GE1, GX2/GE2 1000Base-X, 10/100/1000Base-T(X) Combo port 1~14 10/100Base-T(X) RJ45 port RJ45 port Speed LED RJ45 port Link/ACT LED 15, 16 100Base-FX port LED 15, 16 100Base-FX port SICOM3216-2GX/GE-16T Figure 2 Front Panel 2 Table 2 SICOM3216-2GX/GE-16T Front Panel Number Diagram Label Description...
- Page 8 SICOM3216 User’s Manual-v1.0 Reset Reset button Console Console interface Alarm Alarm LED GX1/GE1, GX2/GE2 1000Base-X, 10/100/1000Base-T(X) Combo port 1~16 10/100Base-T(X) RJ45 port RJ45 port Speed LED RJ45 port Link/ACT LED SICOM3216-2S/M-14T Figure 3 Front Panel 3 Table 3 SICOM3216-2S/M-14T Front Panel Number Diagram Label Description...
- Page 9 10/100Base-T(X) RJ45 port RJ45 port Speed LED RJ45 port Link/ACT LED 15, 16 100Base-FX port LED 15, 16 100Base-FX port SICOM3216-16T Figure 4 Front Panel 4 Table 4 SICOM3216-16T Front Panel Number Diagram Label Description PWR1 Power 1 LED...
-
Page 10: Top Panel
SICOM3216 User’s Manual-v1.0 PWR2 Power 2 LED Running LED Ring Ring LED Reset Reset button Console Console interface Alarm Alarm LED 1~16 10/100Base-T(X) RJ45 port RJ45 port Speed LED RJ45 port Link/ACT LED 3.2 Top Panel Figure 5 Top Panel Table 5 SICOM3216 Top Panel Number Description... -
Page 11: Mounting
SICOM3216 User’s Manual-v1.0 Relay contact 4 Mounting 4.1 Dimension Drawing Dimension Drawing for DIN-Rail Mounting (Unit: mm) Figure 6 DIN-Rail Mounting Dimension Dimension Drawing for Panel Mounting (Unit: mm) Figure 7 Panel Mounting Dimension... -
Page 12: Mounting Steps
SICOM3216 User’s Manual-v1.0 4.2 Mounting Steps SICOM3216 DIN-Rail Mounting The specific steps are as follows: Step 1: Select the mounting position for SICOM3216 and ensure that there is adequate space. Step 2: Insert the top of the DIN-Rail into the slot of the DIN-Rail connecting seat in the rear panel of SICOM3216 as shown below;... - Page 13 SICOM3216 User’s Manual-v1.0 Figure 9 Dismounting SICOM3216 Panel Mounting The specific steps are as follows: Step 1: Select the mounting position for SICOM3216 on the wall or in cabinet; ensure that there is adequate space for the switch. Step 2: Drill 4 holes on the selected position according to the panel mounting dimension drawing;...
- Page 14 SICOM3216 User’s Manual-v1.0 Figure 10 Panel Mounting Remove SICOM3216 from wall or cabinet The specific steps are as follows: Step 1: Use a screwdriver to loosen 4 screws; move the switch up to let screws into 4 holes with the diameter of 6.5mm (Ф6.5). Step 2: Unscrew the screws from wall or cabinet;...
-
Page 15: Cable Connection
SICOM3216 User’s Manual-v1.0 5 Cable Connection 5.1 10/100Base-T(X) Ethernet Port 10/100Base-T(X) Ethernet RJ45 port can be connected to terminal equipment and network devices with straight-through cables or crossover cables. RJ45 connectors must be equipped at both ends of cable. Pin definition of 10/100Base-T(X) RJ45 port Pin number of 10/100Base-T(X) RJ45 port is shown in Figure 12 Figure 12 RJ45 Port Pin definition of 10/100Base-T(X) RJ45 port is shown in Table 6... -
Page 16: 100Base-Fx Ethernet Port
SICOM3216 User’s Manual-v1.0 Figure 13 10/100M Straight-through Cable Wiring Figure 14 10/100M Cross-over Cable Wiring Note: The correlation between the pin of RJ45 connector and the color of twisted pair is: 1-orange and white, 2-orange, 3-green and white, 4-blue, 5-blue and white, 6-green, 7-brown and white, 8-white. -
Page 17: 1000Base-X, 10/100/1000Base-T(X) Combo Port
SICOM3216 User’s Manual-v1.0 of switch A to the RX (receive) port of switch B, and the RX (receive) port of switch A to the TX (transmit) port of switch B in order to transmit data between switch A and switch B. Figure 15 100Base-FX Port Wiring Note: A laser is used to transmit signals in fiber cables. -
Page 18: 10/100/1000Base-T(X) Ethernet Port
SICOM3216 User’s Manual-v1.0 Figure 16 Combo Port 5.3.1 10/100/1000Base-T(X) Ethernet Port 10/100/1000Base-T(X) Ethernet RJ45 port can be connected to terminal equipment and network devices with straight-through cables or crossover cables. RJ45 connectors must be equipped at both ends of cable. ... - Page 19 SICOM3216 User’s Manual-v1.0 Transmit/Receive Data(TRD0+) Transmit/Receive Data(TRD1+） Transmit/Receive Data(TRD0-) Transmit/Receive Data(TRD1-) Transmit/Receive Data(TRD1+) Transmit/Receive Data(TRD0+) Transmit/Receive Data(TRD2+) Transmit/Receive Data(TRD3+) Transmit/Receive Data(TRD2-) Transmit/Receive Data(TRD3-) Transmit/Receive Data(TRD1-) Transmit/Receive Data(TRD0-) Transmit/Receive Data(TRD3+) Transmit/Receive Data(TRD2+) Transmit/Receive Data(TRD3-) Transmit/Receive Data(TRD2-) Note: “+”“-”means level polarity. Wiring Sequence Figure 18 10/100/1000M Straight-through Cable Wiring...
-
Page 20: 1000Base-X Port
SICOM3216 User’s Manual-v1.0 Figure 19 10/100/1000M Cross-over Cable Wiring Note: The correlation between the pin of RJ45 connector and the color of twisted pair is: 1-orange and white, 2-orange, 3-green and white, 4-blue, 5-blue and white, 6-green, 7-brown and white, 8-white. 5.3.2 1000Base-X Port Insert Gigabit SFP optical module into 1000Base-X port, and then plug optical fiber into SFP module to transmit data. - Page 21 SICOM3216 User’s Manual-v1.0 Gigabit SFP optical module is equipped with LC connector, and each port consists of TX (transmit) port and RX (receive) port, as shown in Figure 21. Connect the TX (transmit) port of switch A to the RX (receive) port of switch B, and the RX (receive) port of switch A to the TX (transmit) port of switch B in order to transmit data between switch A and switch B, as shown in Figure 21.
-
Page 22: Console Interface
SICOM3216 User’s Manual-v1.0 While wiring, first insert the SFP optical module into the SFP slot in the switch, and then plug the optical fiber into the SFP optical module. See Figure 22. Figure 22 SFP Optical Module 5.4 Console Interface Install the driver for Mini USB onto your PC. -
Page 23: Power
SICOM3216 User’s Manual-v1.0 Figure 23 Mini USB Connector Mini USB connector pin definition is shown in Table 8. Table 8 Mini USB Pin Definition Mini USB Pin Definition VBUS USB connector USB connector pin number is shown in Figure 24. Figure 24 USB Connector USB pin definition is shown in Table 9. - Page 24 SICOM3216 User’s Manual-v1.0 block to connect power cable. Note: The cross section area of power cable is required to be greater than 0.75mm and less than 2.5mm . The grounding resistance requirement: <5Ω. 5 pin 5.08mm power terminal block Figure 25 5-pin 5.08mm-spacing Plug-in Terminal Block Table 10 5 Pin 5.08mm Power Terminal Block Contact Definition Contact Number...
-
Page 25: Grounding
SICOM3216 User’s Manual-v1.0 5.6 Grounding Chassis grounding and power terminal grounding Figure 26 Chassis Grounding and Power Terminal Grounding There is a grounding screw on the top panel of the SICOM3216, which is for chassis ground. One end of the chassis grounding cable is connected with the grounding screw and the other end of the cable is reliably grounded. -
Page 26: Relay Contact
SICOM3216 User’s Manual-v1.0 Figure 27 18#AWG Yellow-Green Line (Unit: mm) Note: If SICOM3216 needs to perform a dielectric voltage withstand test, in order to avoid test failure, please disconnect the 18#AWG yellow-green line to disable surge protection circuit that leads to leakage electricity. Figure 28 Disconnect 18#AWG Yellow-Green Line (Unit: mm) 5.7 Relay Contact The relay contact is used for alarm output. -
Page 27: Led Indicators
SICOM3216 User’s Manual-v1.0 outputted through a 3-pin 5.08mm spacing terminal block as shown in Figure 29. Figure 29 3-Pin 5.08mm-Spacing Plug-In Terminal Blocks The electrical parameters of the relay: Max Switch Voltage: 250VAC/220VDC; Max Switch Current: 2A Max Switch Power: 60W Note: Pin 1 and pin 2 are normally-open contacts;... - Page 28 SICOM3216 User’s Manual-v1.0 CPU is running abnormally or the switch is starting. Blinking CPU is running normally (1HZ) CPU is not started up. Alarm LED System alarm Alarm No system alarm. Power LEDs Power connects operates normally. PWR1 Power 1 disconnects or operates abnormally.
-
Page 29: Reset Button
SICOM3216 User’s Manual-v1.0 No effective network connection in the port RJ45 port LEDs Each RJ45 port has two indicators, a yellow LED and a green LED. The yellow LED indicates port rate, while the green LED indicates port connection state. Speed 100M working state (Yellow) -
Page 30: Management Access
SICOM3216 User’s Manual-v1.0 Note: Don’t hold the reset button down for more than 5 second to avoid restoring default configuration. 8 Management Access Access the switch by one of the following three ways. 8.1 Connected through Console Port 1. Install the driver for Mini USB onto your PC. The driver “Mini USB driver.exe”... - Page 31 SICOM3216 User’s Manual-v1.0 4. Build a new connection named “aa” Figure 31 New Connection 5. Select COM port as the connection type. Figure 32 Choose Port 6. Set the parameters of COM port (Bits per second: 115200, Data bits: 8, Parity: None, Stop bits: 1, Flow control: None)
-
Page 32: Connected Through Ethernet Cable
SICOM3216 User’s Manual-v1.0 Figure 33 Set COM Parameters 7. Click “OK” to enter the CLI interface, and type in a CLI command from Table 12. Table 12 CLI Command View Command Description User View SWITCH>enable Enter management view Management View SWITCH#show interface Show the IP address of current switch Management View... -
Page 33: Web Access
SICOM3216 User’s Manual-v1.0 Figure 34 Enter Telnet 3. Click “OK” to enter the Telnet configuration interface. Type in a CLI command from Table 12. 8.3 Web Access 1. Connect the Ethernet port on the PC to any RJ45 port on the switch. 2. -
Page 34: Product Configuration Information
9 Product Configuration Information The specific configuration models of SICOM3216 are shown in Table 13 Table 13 SICOM3216 Configuration Model Interface Description Power SICOM3216-16T supports 16 10/100Base-T(X) RJ45 ports SICOM3216-2S/M-1 supports 2 100Base-FX,SM/MM ports, 12DC, FC/SC/ST connector; 14 10/100Base-T(X) 24AC/DCW... - Page 35 SICOM3216 User’s Manual-v1.0 FC/SC/ST connector; 14 10/100Base-T(X) RJ45 ports Table 14 SICOM3216 Optional Accessories Model Description DT-BGAZ-02 Panel mounting kit DT-FCZ-RJ45-01 RJ45 dustproof shield DT-XL-Mini USB-USB-2m USB console cable, Mini USB to USB, 2m Gigabit SFP Module IGSFP-1000BASE-T-RJ45 1000Base-T(X) port, RJ45 connector IGSFP-10/100/1000BASE-T-RJ45 10/100/1000Base-T(X) port, RJ45 connector IGSFP-M-SX-LC-850-0.55 1000Base-X port;...
-
Page 36: Basic Features And Specifications
10 Basic Features and Specifications Power Requirements Power input: 12DC (9～18VDC), 24AC/DCW (18～72VDC,18～50VAC) Power terminal: 5-pin 5.08mm-spacing plug-in terminal block Power consumption: SICOM3216-16T: 8.3W (MAX) SICOM3216-2S/M-14T: 9.3W (MAX) SICOM3216-2GX/GE-16T: 10.3W (MAX) SICOM3216-2GX/GE-2S/M-14T: 11.3W (MAX) Physical Characteristics Housing: Metal, fanless Installation: DIN-Rail or panel mounting Dimensions (W×H×D): 88mm×135mm×137mm...
Need help?
Do you have a question about the SICOM3216-16T and is the answer not in the manual?
Questions and answers