Table of Contents
Advertisement
5 – Configuration Using IntraGuide
3. Enter a Starting Address and an Ending Address for the range of the search.
4. Click Next. The Select COM Port dialog box appears (Figure 5-7).
5. Click a communications port on the list.
6. Click Next. The final wizard dialog box appears (Figure 5-8).
7. To begin the discovery process, click Finish. A progress dialog box appears for the scan, and
settings for the device with the lowest address in the search range appear in the Configuration
pane (Figure 5-9).
GatesAir
Intraplex Products
Figure 5-6. Limit Address Range Dialog Box
Figure 5-7. Select COM Port Dialog Box
Figure 5-8. Select COM Port Dialog
T1 CrossConnect Installation & Operation Manual
Version 2
5-7
Advertisement
Table of Contents
