Hp Webos Account - HP TouchPad User Manual

Hide thumbs Also See for TouchPad:
Table of Contents

Advertisement

Draft 1 Review
T5. Tether your device to your computer and reinstall webOS
IMPORTANT
Don't try this method until you've already tried the four Ts before
this.
1
On your computer's web browser, go to hpwebos.com/account,
sign in, and write down the device's product number and serial
number.
2
Go to
hpwebos.com/rom
and click the link to get
3
Enter the device's product number and serial number and follow the
instructions.
Why this might help
Installing the latest version of webOS wipes and refreshes all memory.
Your preferences, installed software, and files in USB drive storage are not
affected.
Want help while you use webOS Doctor?
Select your device and click
Support
options.

HP webOS Account

Creating your HP webOS Account: Is your device ready for
setup?
Did you remove the clear plastic screen protector? Your
BEFORE YOU BEGIN
device won't respond well to your taps if the protector is covering the
touchscreen.
Top secret
webOS
Doctor.
Go to hpwebos.com/support.
Services. Select one of the support
Do not distribute
Look along the top of the screen from left to right:
Do you see:
1
Your wireless service provider's name?
2
The name AT&T?
No? Then your device isn't activated. If your device uses a SIM card,
make sure that the card is not damaged and that it is inserted
correctly. If you cannot activate your device, contact your wireless
service provider for help.
3
The 3G icon?
No? Then move outside or go to a more built-up area until you see
the 3G icon. If you see a white triangle, you're roaming, and setup
won't work. Move to a location where you are within coverage of
your wireless service provider network. Setup takes longer when
your device has a 2G connection.
4
At least three signal-strength bars showing white (not gray)?
No? Then move to a location where you get a stronger signal from
your wireless service provider network.
5
A battery icon that is green or at least one-third white?
No? Then charge your device: Plug the USB cable into the AC
charger, plug the charger into an electric outlet, and attach the small
end of the cable to the charger/microUSB connector on your device.
Charge the device for at least one hour.
If you answered Yes to all these questions and still can't set up your
account, read the next sections.
HP confidential
Chapter 15 : Troubleshooting
189

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TouchPad and is the answer not in the manual?

Questions and answers

Patrick Warner
January 28, 2025

Touchpad works but after I get it where I want it, I hit enter and nothing happens?

1 comments:
Mr. Anderson
February 10, 2025

The HP TouchPad may not respond after pressing Enter due to several possible reasons:

1. TouchPad Disabled – The touchpad might have been accidentally turned off. Some HP laptops allow enabling or disabling the touchpad by double-tapping the top-left corner of the touchpad.

2. Driver Issues – If the touchpad driver is missing or corrupted, it may not function properly. The device may show a warning in the Device Manager, such as an orange exclamation mark.

3. Windows Settings – The touchpad settings may not be visible or configured incorrectly in Windows settings.

4. Hardware Malfunction – If the touchpad is not detected at all, there could be a hardware issue.

To resolve this issue, try enabling the touchpad, updating or reinstalling the driver, and checking Windows settings. If the problem persists, hardware failure may be the cause.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF