Print Manager; Vpn - HP TouchPad User Manual
Hide thumbs
Also See for TouchPad:
- User manual (20 pages) ,
- Specification (5 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Draft 1 Review
3
In Automatic IP settings, tap
On
•
When Automatic IP settings is on, the IP address is automatically
and dynamically configured.
•
When Automatic IP settings is off, you can manually configure the
IP address.
4
If you turned Automatic IP settings off, enter any of the following:
Address:
The IP address of the network
Subnet:
The Subnet address of the network
Gateway:
The Gateway address of the network
DNS Servers:
Addresses (#1 and #2)
5
Tap Done.
Print Manager
Add a printer
Your device supports printing on HP wireless-enabled
BEFORE YOU BEGIN
printers only. Make sure your printer is turned on and that both your
device and the printer are connected to your local or corporate wireless
network. For personal printers, see the instructions that came with your
printer for information about setting up a printer on a wireless network.
Your device detects most HP printers that are connected to a wireless
network automatically. Some HP wireless-enabled printers or
wireless-enabled printers on a corporate network, however, may need to
be added manually to your device.
1
Open
Print Manager
.
2
Tap
Add or remove
printer.
3
Tap
Enter Printer IP Address
and enter the printer's IP address.
Top secret
or Off.
Do not distribute
4
(Optional) Tap
Name Printer
do not enter a name, the printer's IP address is used as the default
name.
5
Tap
Add
Printer.
Cancel printing
1
Open
Print Manager
2
Do one of the following:
•
To cancel a single print job: Tap the print job under Print Queue.
•
To cancel all your print jobs: Tap
Remove a printer
Your device does not need to be connected to a wireless network to
remove a printer that you had set up to print on that network.
1
Open
Print Manager
2
Tap
Add or remove
printer.
3
Tap the network name listed under the Add Printer button and select
the network that the printer you want to remove is associated with.
4
Tap
Remove
beside the printer you want to remove, and then tap
Yes.
VPN
What is VPN?
If you want to use your device to access files on your company's servers,
you may need to set up a VPN (virtual private network). You can do this
HP confidential
and enter a name for the printer. If you
.
Cancel
All.
.
Chapter 14 : Wireless connections
179
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TouchPad and is the answer not in the manual?
Questions and answers
Touchpad works but after I get it where I want it, I hit enter and nothing happens?
The HP TouchPad may not respond after pressing Enter due to several possible reasons:
1. TouchPad Disabled – The touchpad might have been accidentally turned off. Some HP laptops allow enabling or disabling the touchpad by double-tapping the top-left corner of the touchpad.
2. Driver Issues – If the touchpad driver is missing or corrupted, it may not function properly. The device may show a warning in the Device Manager, such as an orange exclamation mark.
3. Windows Settings – The touchpad settings may not be visible or configured incorrectly in Windows settings.
4. Hardware Malfunction – If the touchpad is not detected at all, there could be a hardware issue.
To resolve this issue, try enabling the touchpad, updating or reinstalling the driver, and checking Windows settings. If the problem persists, hardware failure may be the cause.
This answer is automatically generated