CHAPTER 1 - GETTING STARTED
MB90 MB120 Series Service Manual
Setting baud rate
Select the desired baud rates of 1200,
2400, 4800, 9600, 19200, 38400, 57600
and 115200. Default setting is 9600 Baud.
Setting data bits
Select the desired data bits of 7 or 8.
Default setting is 8.
Setting parity
Select the desired parity setting of either
NONE,EVEN or ODD. Default setting is
NONE.
Setting stop bits
Select the desired stop bits of 1 or 2.
Default setting is 1.
Setting handshake
Select the desired handshake of NONE,
Xon/Xoff. Default setting is NONE.
20
Ohaus Corporation www.ohaus.com