Installing The Mb-2T Expansion Module; Defining The Meaning Of The Display Leds - Hirschmann MICE MS20-0800 Series User Manual

Connect the ports of the media modules plugged into the basic module as
required in order to set up your industrial ETHERNET or expand your
existing network.
 Install the data lines according to your requirements.
2.1.13

Installing the MB-2T expansion module

The MB-2T expansion module allows you to expand the basic MS20-1600
and MS30-1602 module with two sockets for media modules. You can install
the MB-2T expansion module in running operation.
 On the right side of the module, loosen the screws at the top and bottom
(1-3 revolutions).
 Take off the side panel.
 If you have not already done so, mount the basic module on the hat rail.
 Push the MB-2T expansion module on the hat rail to the basic module
until the modules are plugged together.
 Tighten the screws on top and bottom of the basic module again.
2.1.14

Defining the meaning of the display LEDs

You use the "SELECT" button on the basic module to define the meaning of
the LEDs of the media modules. You press the button to switch to the next
display meaning. The display status LEDs of the basic module show the
current meaning of the port LEDs of the media modules.
See "Display elements" on page 29.
1
2
Figure 24: "SELECT" button on the MICE basic modules
1 - Display LEDs
2 - "SELECT" key
50


MS20/MS30 MS20/MS30
Release 10 07/2012