Advertisement
3. U
PIN P
SING THE
Press numeral key to enter password if needed. Then press green [ENTER] key to finish password
key-in. Press red [CANCEL] key to exit from presently status (Figure 7).
Note: If the PIN is entered incorrectly, press [CANCEL] and re-enter it.
4. I
NSTALLING THE
The privacy shield is installed on the device, and the keypad will be separated from the LCD.
(Figure 8)
5. C
LEANING
Periodically clean the PIN Pad device with a clean cloth dampened with water and a mild soap or
cleaner. Do not use harsh chemicals.
6. M
AINTENANCE
Stringent quality-control standards are followed in manufacturing all PIN Pad devices. Numerous
tests are performed on each unit before leaving the factory to ensure quality and reliability.
7. R
ETURNING THE
If you need to return your PIN Pad device for service or replacement, contact your service
provider or sales representative for instructions.
Note: Do not try to service, repair or adjust the PIN Pad device in any way; doing so will void
your warranty.
Caution: Risk of explosion if the battery is replaced by an incorrect type. Please dispose of used
battery according to the instructions.
AD
P
S
RIVACY
HIELD
8006L1-1CR PIN P
Figure 7
Figure 8
AD
Advertisement
