Omron ERT1 Series Operation Manual page 44

Overview of System Startup Procedure
1,2,3...
24
Common Procedure 7-2-2. Setting Tags Using Symbols
Use the following procedure to use CX-Programmer to create a symbol, which
can then loaded as a tag by the Network Configurator.
1. Register the symbol with the CX-Programmer.
Start the CX-Programmer specifying the model number of the CPU Unit
you are using.
2. Register the symbol.
To register the symbols as an
array, click the Advanced Button
and enter the number of array
elements.
The tags are to be
registered as a tag
set, so click the Yes
Button.
A tag set with the
same name as the tag
is registered.
Check both the input
and output tags.
Click Symbol Table under
the PLC icon.
Click Insert Symbol.
Click the OK Button.
Section 2-1
Input the symbol name.
Select the data type.
Input the address to store
the symbol. In this example,
automatic allocation is set,
so leave this box empty.
Select the Network Symbol
Check Box and select either
the Input or Output Option.