Omron ERT1 Series Operation Manual page 10

Relevant Manuals
The following table lists manuals that contain information relevant to EtherNet/IP Slave Units.
Manual Model
number
W481 ERT1 Series
W465 CS1W-EIP21
CJ1W-EIP21
CJ2H-CPU6@-EIP
W342 CS1G/H-CPU@@H
CS1G/H-CPU-@@V1
CS1W-SCU21
CS1W-SCB21/41
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ1G/H-CPU@@H
CJ1G-CPU@@
CJ1W-SCU41
W463 CXONE-AL@@C-V3
CXONE-AL@@D-V3
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
x
Name
ERT1 Series Provides information on operating and installing Ether-
EtherNet/IP Slave Net/IP Slave Units.
Units Operation
Manual (this manual)
EtherNet/IP Units Provides information on operating and installing Ether-
Operation Manual Net/IP Units, including details on basic settings, tag data
links, and FINS communications.
Refer to the Communications Commands Reference
Manual (W342) for details on FINS commands that can
be sent to CS-series and CJ-series CPU Units when
using the FINS communications service.
Refer to the Ethernet Units Operation Manual
Construction of Applications (W421) for details on con-
structing host applications that use FINS communica-
tions.
Communications Describes the C-series (Host Link) and FINS communi-
Commands Refer- cations commands used when sending communications
ence Manual commands to CS-series and CJ-series CPU Units.
CX-One Ver. 3.0 Describes the setup procedures for the CX-One. Informa-
Setup Manual tion is also provided on the operating environment for the
CX-One.
Contents