Combination Switch; Hazard Warning Lamps; Cornering Light Function - Mercedes-Benz GLA 250 2019 Operator's Manual

Exterior lighting
104

Combination switch

To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction of
arrow ; or ?.
To switch on the high-beam headlamps:
X
turn the light switch to L or Ã.
Press the combination switch beyond the
X
pressure point in the direction of arrow :.
The high-beam headlamps only switch on in
the à position if the low-beam head-
lamps are on.
The blue K indicator lamp in the instru-
ment cluster lights up when the high-beam
headlamps are switched on.
To switch off the high-beam headlamps:
X
move the combination switch back to its
normal position.
The blue K indicator lamp in the instru-
ment cluster goes out.
To switch on the high-beam flasher: pull
X
the combination switch in the direction of
arrow =.

Hazard warning lamps

To switch on the hazard warning lamps:
X
press button :.
All turn signals flash. If you now switch on a
turn signal using the combination switch,
only the turn signal lamp on the correspond-
ing side of the vehicle will flash.
To switch off the hazard warning lamps:
X
press button :.
The hazard warning lamps automatically
switch on if:
an air bag is deployed or
R
the vehicle decelerates rapidly from a speed
R
of above 45 mph (70 km/h) and comes to a
standstill
The hazard warning lamps switch off automati-
cally if the vehicle reaches a speed of above
6 mph (10 km/h) again after a full brake appli-
cation.
The hazard warning lamps still operate if the
ignition is switched off.

Cornering light function

The cornering light function improves the illu-
mination of the road over a wide angle in the