Vehicle Tool Kit; Flat Tire; Vehicles With A Tire-Change Tool Kit - Mercedes-Benz GLA 250 2019 Operator's Manual

so, contact your local waste disposal com-
pany.

Vehicle tool kit

General notes
Vehicles with a TIREFIT kit: the TIREFIT kit is
located in the stowage well under the cargo
compartment floor.
Vehicles with a tire-change tool kit: the tire-
change tool kit is in the stowage well under
the cargo compartment floor.
Apart from certain country-specific variations,
the vehicles are not equipped with a tire-
change tool kit. Some tools for changing a
wheel are specific to the vehicle. For more
information on which tire changing tools are
required and approved to perform a wheel
change on your vehicle, consult a qualified
specialist workshop.
Tools required for changing a wheel may
include, for example:
Jack
R
Wheel chock
R
Lug wrench
R
Alignment bolt
R
Vehicles with a TIREFIT kit
Tire inflation compressor
:
Tire sealant filler bottle
;
= Towing eye
Open the tailgate.
X
Lift the cargo compartment floor up
X
( page 256).
Y
Use the TIREFIT kit (
X
it.
Towing eye = is located under tire inflation
compressor :.
i
Example: equipment and country-specific
variations possible.

Vehicles with a tire-change tool kit

Open the tailgate.
X
Lift the cargo compartment floor up
X
( page 256).
Y
Remove the tire-change tool kit.
X
The tire-change tool kit contains:
Jack
R
Lug wrench
R
Pair of gloves
R
Folding wheel chock
R

Flat tire

Preparing the vehicle
Your vehicle may be equipped with:
MOExtended tires (tires with run-flat proper-
R
ties) ( page 288)
Y
Vehicle preparation is not necessary on
vehicles with MOExtended tires.
a TIREFIT kit ( page 287)
R
Y
Vehicles equipped with MOExtended tires are
not equipped with a TIREFIT kit at the factory.
It is therefore recommended that you addition-
ally equip your vehicle with a TIREFIT kit if you
mount tires that do not feature run-flat charac-
teristics, e.g. winter tires. A TIREFIT kit may be
obtained from a qualified specialist workshop.
Information on changing and mounting wheels
( page 325).
Y
Stop the vehicle on solid, non-slippery and
X
level ground, as far away as possible from
traffic.
Switch on the hazard warning lamps.
X
Secure the vehicle against rolling away
X
( page 145).
Y
If possible, bring the front wheels into the
X
straight-ahead position.
Flat tire
page 289) or remove
Y
287