Off-Road Program; Display In The Assistance Graphic; Changing The Set Speed While The Vehicle Is In Motion; To Activate/Deactivate The Off-Road Program - Mercedes-Benz GLA 250 2019 Operator's Manual

Driving systems
170

Display in the assistance graphic

Select the Assistance Graphic Assistance Graphic
X
using the on-board computer (
When DSR is activated symbol : appears
in the assistance graphics display.
Changing the set speed while the vehi-
cle is in motion
When DSR is activated, you can change the
set speed to a value between 2 mph and
11 mph (Canada: between 4 km/h and
18 km/h) while the vehicle is in motion.
To increase or decrease in 1 mph incre-
X
ments (Canada: 1 km/h increments):
briefly press the cruise control lever to the
pressure point, up : for a higher set speed
or down ; for a lower set speed.
The set value appears in the status indicator
of the multifunction display.

Off-road program

General notes
i
The Off-road program is only available on
vehicles with the ON&OFFROAD package.
The off-road program assists you in driving off-
road. The engine's performance characteris-
tics and the gearshifting characteristics of the
automatic transmission are adapted for this
purpose. ABS, ESP
cially adapted to off-road driving are also acti-
vated.
Do not use the off-road program on roads that
function
are snow-covered or icy or if you have moun-
page 197).
Y
ted snow chains on your vehicle.
For information on driving off-road, see
( page 153).
Y
To activate/deactivate the off-road
program
Press DYNAMIC SELECT button :
X
(
Y
drive program is selected.
The status icon of the Off-road program is
shown in the multifunction display.
®
and ETS programs espe-
page 132) repeatedly until the Off-road