Handling The Hydromette Bl Compact B 2 - GANN Hydromette BL Compact B 2 Operating Instructions Manual

Notes on Use
4.3

Handling the Hydromette BL Compact B 2

To prevent any influence from the hand of the operator who is
performing the measurement, during the measurement and
inspection process, only the rear half can be covered by the hand.
The front half (display/ball) of the instrument must remain free.
Handling the instrument properly:
While measuring, always grip the instrument by the lower end of its
housing.
Figure 4-1 Correct handling
21
Hydromette BL Compact B 2