Settings Menus; Measuring Menu (Main Menu) - GANN Hydromette BL Compact B 2 Operating Instructions Manual

2.2

Settings Menus

By repeatedly pressing the "Up" and "Down" keys the following
menus can be selected in sequence (sequence using the "Down"
key; the menus are accessed in the opposite direction using the
"Up" key):
1. Measuring menu (main menu): The measuring process
can be performed from here.
2. Type selection: The material type can be selected here.
3. Alarm value setting: This allows the user to set a
measurement value threshold that will trigger an acoustic
signal when exceeded; the set limit will be displayed in the
second line.
4. Maximum value: The largest measured value is
displayed.
2.2.1

Measuring Menu (main menu)

The last measured value is shown together with the comment
"Hold". The instrument temperature and the current type are also
shown on the display.
A new measurement can be started in this menu by pressing the
"M" key.
The "Hold" icon disappears from the display during the
measurement. After the "M" key is released, the measured value is
stored. The "Hold" icon is displayed again.
If the new measured value is greater than the previous maximum,
"Max" flashes on the display. The "M" key is pressed briefly to store
the new value. A new measurement can be started without altering
the previous maximum by pressing "M" longer if the value is not to
be stored.
Hydromette BL Compact B 2
Basic Functions
11